Magellan-2200, Model 3 Magellan-2200, Model 3 Default Manufacturer The Magellan-2200, Model 3 device has no ventilator, meaning that each patient must be spontaneously breathing or be bagged by the provider AE-131 View Offer MRI Med
MRI Med is The Leading Provider of MRI Medical Supplies - We Will Beat The Lowest Price By 3%!
Location
Home / MRI Anesthesia Products / Magellan-2200, Model 3

Magellan-2200, Model 3

Magellan-2200, Model 3
AE-131 - Magellan-2200, Model 3

The Magellan-2200, Model 3 device has no ventilator, meaning that each patient must be spontaneously breathing or be bagged by the provider. This machine was designed for the user whose requirement is for short procedures in which a ventilator is not necessary, as well as itinerant providers, mission groups and customers whose capital equipment budgets require a basic anesthetic gas delivery device, as it is among the least expensive FDA cleared anesthesia delivery devices available. Model 3 may be configured to be MRI certified, and due to its small footprint and very light weight it may be very conveniently used in a variety of special procedure rooms within a hospital environment, as well as surgical centers. Pneumatically powered by either air or oxygen, this device is completely portable , the single agent anesthetic vaporizer in your choice of available agent is included within the price, not added as a necessary option. The Model 3 deserves your serious consideration if your requirements are for a simple, inexpensive device. CALL FOR PRICING

SPECIFICATIONS

  • Dimensions: Height 14.5-inches Width 12-inches Depth 8-inches
  • Weight: Free Standing 29 lbs. fully equipped Shipping Weight 40 lbs.
  • Machine Materials: Aluminum, brass and plastic
  • Carrying Case Materials: Plastic, military grade
  • Operating Temperature Range: 35 degrees F to 95 degrees F
  • Recommended Gas Supply Sources: O2 Main and Cylinders 45 psi to 55 psi (50 psi is optimal)
    Air Main, Cylinders and/or 45 psi to 55 psi (50 psi is optimal)
    Air Compressors
  • Flowmeter Fresh Gas Flow Calibrated and scaled 0-15 lpm > 30 lpm.
  • Oxygen Flush Valve Recessed, self-closing, push-button, color coded, and labeled, provides 45-55 lpm constant flow, while push-button is depressed.
  • CO2 Absorber King Systems KAB-1, pre-filled or refillable
  • CO2 Absorber Canister Capacity 400 grams soda lime
  • Directional Valves Built in the CO2 Absorber
  • CO2 Absorber Mounting Bracket Plastic, secured with knob to main frame of machine
  • Pressure Relief Valve Attached to Bag/Gauge/PRV Arm
  • Common Gas Outlet Quick-Connect, Size Indexed
  • Tubing Circuit King Systems F-360-61 or any standard anesthesia circle
  • Gas Pressure Hoses DISS and Thread indexed, female connectors at both ends
  • Gas Inlet Manifold DISS, Thread indexed male connectors with one way valves with separate filters and filter spacers
  • Gas Inlet Pressure Regulators
  • Main Supply Cylinder DISS and Thread indexed for Oxygen and Air
  • Safety back-up Cylinder Pin-Indexed, Yoke-mounted for "D" and "E" cylinders
  • Oxygen and Air Supply Gauges 0-3000 psi range, color-coded and clearly labeled
  • Oxygen Supply Alarm Pneumatically actuated when supply pressure falls below 30 psi (mains)
  • Alarm Power Source 9-volt battery located in body of alarm container
  • Air and Oxygen Flowmeters Calibrated and scaled 0-10 lpm, color coded, O2 flowmeter has fluted knob for easy identification by touch
  • Oxygen Analyzer/Monitor Maxtec OM-25ME galvanic cell sensor, sensor-life expectancy of 2 years under normal conditions
  • Oxygen Analyzer Power Source 2 each AA batteries, life expectancy approx 3000 use-hours
  • Auxiliary O2 Flow Selector Scaled 0-10 lpm in set increments, used for pre/post anesthesia oxygen administration with nasal cannula mask
  • Vaporizer Penlon Sigma Delta series, bolt (cage) mounted
  • Patient Pressure Gauge Mounted on front side of Bag/PRV Scavenger Arm, + 60 cmH2O to -60 cmH2O
Total Machine Gas Leakage @30 cmH2O -0-ml/min
@80 cmH2O -0-ml/min
Internal System Compliance @20 cmH2O 1.1 ml/cmH2O
@40 cmH2O 1.3 ml/cmH2O
Internal System Resistance @1.0 L/sec gas flow 4.11 cmH2O
@0.5 L/sec gas flow 1.80 cmH2O
APL Valve Pressure Drop @3.0 l/min gas flow 0.12 cmH2O
@30 l/min gas flow 1.03 cmH2O
Storage Temperature
Indoors + 122 degrees F Outdoors -15 degrees F
(Allow unit to warm to normal operating room temperature for at least one hour)
Categories
MRI Med
Middle Header
Phone: (707) 762-8600
9am - 5pm M-F PCT
MRI Med
P.O. Box 751561
Petaluma, CA 94975
Your Cart
Your Cart: Empty
Search
© 2019 MRI Med, all rights reserved worldwide.
Software: Kryptronic eCommerce, Copyright 1999-2019 Kryptronic, Inc. Exec Time: 0.085821 Seconds Memory Usage: 2.123291 Megabytes
Kryptronic